Termite Protection Newmarket & Northside | Conquer Termites Brisbaneo

Important Update: Our Northside operations have consolidated

For over 20 years, Conquer Termites has been the trusted name for termite management across Brisbane’s northern suburbs. To ensure we continue providing the highest technical standards in the industry, our Northside operations have officially consolidated into our Central Technical Headquarters in Cannon Hill, Brisbane.

Why the move?

By centralising our team at our primary Technical HQ, we can provide our Newmarket and Northside clients with:

Direct Access to Senior Technicians: Our most experienced termite specialists are now under one roof.
Advanced Equipment Hub: Our full suite of Thermal Imaging and Termatrac T3i Radar units is maintained and deployed from our central facility.
Rapid Response Teams: Centralising our fleet allows for more efficient scheduling across the Northside corridor, from Newmarket to Ferny Hills.

Still Serving Newmarket, Enoggera, and Beyond

While our physical office address has changed, our commitment to the Northside hasn’t. We continue to be the primary termite specialists for:

Newmarket & Wilston: Protecting the beautiful character homes and Queenslanders that require specialised sub-floor expertise.
Enoggera & Alderley: Managing termite pressure in post-war homes and properties near local parklands.
The Gap & Ashgrove: Addressing the unique challenges of hilly terrain and high-risk vegetation.

The Conquer “3-Step” Difference

Don’t settle for a rebranded alternative or a “mobile-only” service with no physical infrastructure. When you choose Conquer Termites, you are choosing a technical institution.

Step 1: Professional Termite Inspection (Detection)

“You can’t treat what you haven’t found.”

A proper inspection is the foundation of your home’s safety. While competitors might spend 30 minutes doing a “visual check,” a Conquer Termites inspection is a deep-dive technical audit of your property.

What we inspect that others don’t:

Thermal Imaging Technology: We use high-resolution FLIR thermal cameras to detect heat signatures behind your walls—spots where termites are active but invisible to the naked eye.
Termatrac T3i motion detector: This is the world’s most advanced termite detection device. We use it to confirm movement through timber and brick without needing to pull your walls apart.
Moisture Mapping: Termites thrive in high-moisture areas (leaking showers, drainage issues). We map these “high-risk” zones to identify entry points.
Roof & Sub-floor Voids: We don’t just peek; we crawl. We check every accessible structural timber for evidence of “mudding” or structural compromise.

Learn more about the termite inspection process

Professional termite thermal imaging inspection Brisbane home

Step 2: Initial Colony Control (Stop them in your home!)

“Stopping the attack without scattering the nest.”

If live termites are found – like the recent Ferny Hills case study—the worst thing you can do is spray them with a generic repellent. This causes the colony to “stress,” scatter, and pop up in another part of your house.

Non-Repellent Foams & Dusts: We use advanced products like Termidor that termites cannot detect. They pass through it, carry it back to the nest, and eliminate the queen through the “Transfer Effect.”
Colony Elimination: We monitor the active site until we are 100% certain the “feeding” has stopped. Only once the immediate threat is neutralized do we move to long-term protection.

Learn more about the initial termite treatment

Step 3: Long-Term Termite Management (The barrier)

“No shortcuts. No compromises. Just permanent protection.”

Once your home is clear, we install a continuous management system to prevent future attacks. This is where most “cheap” quotes fall apart. At Conquer Termites, we do the hard work that others skip.

The Conquer Difference in Installation:

Full Chemical Barriers: We don’t just spray the surface. We trench down to the footings and, where necessary, lift pavers and drill slabs to ensure a 100% continuous treated zone around your home.
Precision Slab Drilling: When we drill through concrete, we don’t leave ugly holes. We use colour-matched plugs to ensure your driveway or patio looks exactly as it did before we arrived.
Baiting & Monitoring Systems: For homes on difficult terrain or reactive clay soils (common in Brisbane), we install world-class Trelona or Sentricon monitoring stations.

I thought you were in Newmarket?

If you’ve noticed changes in the local landscape, rest assured that the original Conquer Termites standards – the ones you’ve trusted for nearly two decades – are now delivered through our Cannon Hill HQ.

We are not a “new” brand or a mobile-only outfit. We are the original Brisbane termite experts, consolidated and stronger than ever.

Ready for a Proper Technical Inspection?

Don’t risk your home with “visual-only” checks. Get the technical-grade protection your Northside home deserves.

Speak to a termite specialist

See what our clients are saying

“We think it’s amazing that customers make the effort to say nice things about us!